Wellsaw Model 58B Horizontal/Vertical Bandsaw

Description

Used Wellsaw Model 58B Horizontal/Vertical Bandsaw.This saws cuts really well seems to be in good condtion and this saw made out all steel.No sheetmetal in this saw(besides pulley cover). American made at its finest. The feed cylinder doesnt appear to be working as it should arm drops fast until it gets to vise or below. May be made this way im unsure. Saw may of had some modifucations by previous owners.(unsure)but sn overall nice saw. Can be used as a vertical but no table comes with saw but 1 could be made very easily. I made few test cuts on some 1/8" angle iron and saw made nice straight cuts. This is own honest opinion each to his own.Please feel free to inspect under power to make your own judgment.Please let me know if you have any questions will try and answer best as I can. If under 300 miles can deliver @ .50 a mile.
Wellsaw 58B Metal Cutting Bandsaw Specifications
Blade Motor: 1/2hp Single Phase ODP
Capacity (Round): 9-1/2″
Capacity (Flat): 11″
Capacity (Rectangular): 9-1/2″ x 11″
45º Angle: 5-1/2″ x 5-1/2″
Vertical Capacity (Throat Depth): 6-1/4″
Vertical Capacity (Throat Height): 9-1/2″
Vertical Capacity (Work Table): 8″ x 10″
Blade Size: 1/2″ x .025 x 7’9″ (93″)
Blade Speeds: 76, 141, 268 SFPM
Blade Guides: Six Sealed Ball Bearings on, Cast Iron Supports
Vise Control: Manual Screw/Quick Action
Swivel Vise: To 45 degrees
Band Wheels: 11″ Cast Iron
Bed Height: 26″
Floor Area” 26″W x 54″L
*** ALL SPECIFICATIONS ARE SUBJECT TO BUYER VERIFICATION NOT RESPONSIBLE FOR INCORRECT  SPECIFICATIONS. MACHINERY IS SOLD AS IS.
Thank you