New Hobart FT900-3310 FLIGHT-TYPE DISHWASHER 480V 3Ph Over Stock !!

Description

New Hobart FT900-3310 advansys FLIGHT- TYPE DISHWASHER 480V 3Ph Over Stock !! New one price over ,000.00 STANDARD FEATURES ■ Opti-RinSe™ system ■ Water usage 120 gph @ 20 psi ■ Microprocessor controls ■ Low temperature alert ■ Single point vent connection ■ 42" access doors on power wash and power rinse chambers, 34" access doors on prewash chamber ■ Variable speed conveyor 4-8.5 fpm ■ Start and stop switches at both ends ■ Doors open indicator ■ Load end flush system ■ Door interlocks ■ 3 H.P. TEFC prewash, power wash and power rinse pump motors ■ Easy to remove wash arms ■ Easy to remove scrap trays and baskets ■ 30-1 ⁄2" wide conveyor ■ Insulated hinged doors ■ Front and rear panels Dimensions: 22' wide x 47"deep x 78-3/4" heights Conveyor Lenghth 10-1/2" x Width: 30 1/2" DESIGN: Fully automatic, flight-type dish machine consisting of a load section with Automatic Soil Removal system, power recirculating prewash, power wash, power rinse and dual rinse/final rinse section. Included with each machine will be flexible plastic strip curtains to control overspray. CONSTRUCTION: Stainless steel tank and chambers with No. 3 polish on appearance surfaces. Frame, legs and feet to be constructed of stainless steel. Inspection doors to be chamber width. PUMPS: Recirculating stainless steel pumps with stainless steel impellers. Pump housing has easy to remove coverplate for access to impeller. All pumps are self-draining. 150 gpm prewash; 292 gpm power wash/power rinse.. MOTORS: Totally enclosed fan cooled (TEFC) design with overload protection. Pump motors to be 1 ⁄2 H.P. for prewash, 5 H.P. for power wash and power rinse, and conveyor motor to be 3 H.P. Available in electrical specifications of 480/60/3. CONTROLS: A stainless steel control center with electronic digital controls mounted at eye level. Power “On/Off” and “Start/Stop” switches integrated into keypad. Digital display indicates door(s) open, low temperature alert, tanks/final rinse temperatures, and other pertinent operating data. Additional “Start/ Stop” switches are located at each end of machine.. FLIGHT-TYPE CONVEYOR: Stainless steel side links, tie rods and conveyor tracks. Injection molded, resilient Duraflex flight links. VENT: Single built-in vent duct with dampers mounted in cleanable cross duct.. RECIRCULATING PREWASH SECTION: Prewash compartment is fitted with upper and lower wash arms. Large removable one piece perforated stainless steel screen sloped downward to deep stainless steel scrap basket. TANK HEAT: Power wash, power rinse and dual rinse tank water temperatures are thermostatically controlled. Low water protection is provided. Specify either electric or steam heat. CONVEYOR DRIVE UNIT: Powered by a 1 ⁄3 H.P. motor. Trip mechanism provided on unload section. Jam protection is provided by load sensing switch at drive platform. Conveyor speed adjustment of 4.0 feet per minute to 8.5 feet per minute is provided on the digital display keypad. DRAINS: Manual, hand-operated, located at each tank. One manual and automatic master drain to be used for Auto Clean and Auto Delime. No other control system allows easier monitoring. The controls are placed in a convenient panel that lets operators verify proper operation and temperatures at a glance. Digital display indicates the unit is on, and confirms that the doors are closed. Automatic door interlocks prevent the pump and conveyor from operating if the doors are open. Easy-to-read digital display indicates accurate temperatures of the 150°F wash, 160°F power rinse, 160°F dual rinse and 180°F final rinse — critical for proper HACCP system record-keeping. Stainless steel pump is built for long life. The stainless steel pump housing and impeller offer greater durability and long life. The pump motor is totally enclosed and fan cooled (TEFC) to protect it from water spray during dishroom clean-up. The pump is also externally mounted to the frame for added rigidity and easy access to the clean-out port. VOLTAGE ❑ 480Volts /60 hz./ 3 phase Scrap baskets capture food particles and are easy to clean. The sloped screens that carry scraps to the scrap baskets are steeper, so less soil gets into the tanks. The basket opening is larger for easy cleaning and basket ha The FT900 Series saves water and energy. The unit is designed to cut water and energy usage, yet provide effective cleaning and sanitizing that meet NSF International requirements. This is achieved through a carefully balanced ratio of water flow to pressure. At 292 gallons per minute (gpm), the machine offers excellent wetting and flooding over ware. Insulated doors also reduce heat loss. The unit’s 2.2 gpm/120 gallons per hour rinse flow rate (the lowest in the industry on a standard machine) saves both water and the energy to heat it. Wider, variable speed conveyor offers increased throughput. The conveyor on the FT900 Series is wider so it can handle more ware. Result: more volume and versatility, quicker work. Its speed is servicer adjustable for the type of ware, soiled condition, or workforce requirements. It can be adjusted from 4 to 8.5 feet per minute. Optional Energy Recovery system. The optional Energy Recovery system captures escaping heat and steam from the exhaust air and uses a heat exchanger to recycle it into energy. This free energy is used to preheat the incoming water supply before it enters the booster heater. The cold ground temperature water passes through a heat exchanger positioned directly in line with the machine’s exhaust system to capture the energy from the exhaust air to elevate the temperature of the water to 128° before it enters the booster heater Flush arm keeps load end clean. The load end also has a readily removable flush arm to rinse food scraps into the Self-draining pumps help keep water clean. Pumps are self-draining when the machine is shut down, so there is no residual water left in the pumps. Installation is quick and easy with modular design, minimal wiring connections, and single point vent. Modular design means the FT900 installs quickly, and reliably. Sections fit through 42" doors. The control panel is already in place, premounted to the power wash/power rinse/final rinse section. Wiring connections are minimal, and there is only a single vent connection, saving time and expense. The control box uses a “single plane” circuitry design for easy accessibility during installation and service. The FT900 is ready to run quickly. Attention CA Residents: Prop 65 Warning. We only Ship to eBay Shipping Address Please make sure and Double check Shipping Address before make payments. We have in stock available local pick up or same day ship.
New Hobart FT900-3310 FLIGHT-TYPE DISHWASHER 480V 3Ph Over Stock !!
New Hobart FT900-3310 FLIGHT-TYPE DISHWASHER 480V 3Ph Over Stock !!
Click images to enlarge
Description
New Hobart FT900-3310 advansys FLIGHT-
TYPE DISHWASHER 480V 3Ph Over Stock !!
New one price over 5,000.00
STANDARD FEATURES
■ Opti-RinSe™ system
■ Water usage 120 gph @ 20 psi
■ Microprocessor controls
■ Low temperature alert
■ Single point vent connection
■ 42" access doors on power wash and power rinse chambers, 34" access doors on prewash chamber
■ Variable speed conveyor 4-8.5 fpm
■ Start and stop switches at both ends
■ Doors open indicator
■ Load end flush system
■ Door interlocks
■ 3 H.P. TEFC prewash, power wash and power rinse pump motors
■ Easy to remove wash arms
■ Easy to remove scrap trays and baskets
■ 30-1 ⁄2" wide conveyor
■ Insulated hinged doors
■ Front and rear panels
Dimensions: 22' wide x  47"deep x 78-3/4" heights
Conveyor Lenghth  10-1/2" x Width: 30 1/2"
DESIGN:
Fully automatic, flight-type dish machine consisting of a load section with Automatic Soil Removal system, power recirculating prewash, power wash, power rinse and dual rinse/final rinse section. Included with each machine will be flexible plastic strip curtains to control overspray.
CONSTRUCTION:
Stainless steel tank and chambers with No. 3 polish on appearance surfaces. Frame, legs and feet to be constructed of stainless steel. Inspection doors to be chamber width.
PUMPS:
Recirculating stainless steel pumps with stainless steel impellers. Pump housing has easy to remove coverplate for access to impeller. All pumps are self-draining. 150 gpm prewash; 292 gpm power wash/power rinse.
.
MOTORS:
Totally enclosed fan cooled (TEFC) design with overload protection. Pump motors to be 1 ⁄2 H.P. for prewash, 5 H.P. for power wash and power rinse, and conveyor motor to be 3 H.P. Available in electrical specifications of 480/60/3.
CONTROLS:
A stainless steel control center with electronic digital controls mounted at eye level. Power “On/Off” and “Start/Stop” switches integrated into keypad. Digital display indicates door(s) open, low temperature alert, tanks/final rinse temperatures, and other pertinent operating data. Additional “Start/ Stop” switches are located at each end of machine.
.
FLIGHT-TYPE CONVEYOR:
Stainless steel side links, tie rods and conveyor tracks. Injection molded, resilient Duraflex flight links.
VENT:
Single built-in vent duct with dampers mounted in cleanable cross duct..
RECIRCULATING PREWASH SECTION:
Prewash compartment is fitted with upper and lower wash arms. Large removable one piece perforated stainless steel screen sloped downward to deep stainless steel scrap basket.
TANK HEAT:
Power wash, power rinse and dual rinse tank water temperatures are thermostatically controlled. Low water protection is provided. Specify either electric or steam heat.
CONVEYOR DRIVE UNIT:
Powered by a 1 ⁄3 H.P. motor. Trip mechanism provided on unload section. Jam protection is provided by load sensing switch at drive platform. Conveyor speed adjustment of 4.0 feet per minute to 8.5 feet per minute is provided on the digital display keypad.
DRAINS:
Manual, hand-operated, located at each tank. One manual and automatic master drain to be used for Auto Clean and Auto Delime.
No other control system allows easier monitoring.
The controls are placed in a convenient panel that lets operators verify proper operation and temperatures at a glance. Digital display indicates the unit is on, and confirms that the doors are closed. Automatic door interlocks prevent the pump and conveyor from operating if the doors are open. Easy-to-read digital display indicates accurate temperatures of the 150°F wash, 160°F power rinse, 160°F dual rinse and 180°F final rinse — critical for proper HACCP system record-keeping.
Stainless steel pump is built for long life.
The stainless steel pump housing and impeller offer greater durability and long life. The pump motor is totally enclosed and fan cooled (TEFC) to protect it from water spray during dishroom clean-up. The pump is also externally mounted to the frame for added rigidity and easy access to the clean-out port.
VOLTAGE ❑ 480Volts /60 hz./ 3 phase
Scrap baskets capture food particles and are easy to clean.
The sloped screens that carry scraps to the scrap baskets are steeper, so less soil gets into the tanks. The basket opening is larger for easy cleaning and basket ha
The FT900 Series saves water and energy.
The unit is designed to cut water and energy usage, yet provide effective cleaning and sanitizing that meet NSF International requirements. This is achieved through a carefully balanced ratio of water flow to pressure. At 292 gallons per minute (gpm), the machine offers excellent wetting and flooding over ware. Insulated doors also reduce heat loss. The unit’s 2.2 gpm/120 gallons per hour rinse flow rate (the lowest in the industry on a standard machine) saves both water and the energy to heat it.
Wider, variable speed conveyor offers increased throughput.
The conveyor on the FT900 Series is wider so it can handle more ware. Result: more volume and versatility, quicker work. Its speed is servicer adjustable for the type of ware, soiled condition, or workforce requirements. It can be adjusted from 4 to 8.5 feet per minute.
Optional Energy Recovery system.
The optional Energy Recovery system captures escaping heat and steam from the exhaust air and uses a heat exchanger to recycle it into energy. This free energy is used to preheat the incoming water supply before it enters the booster heater. The cold ground temperature water passes through a heat exchanger positioned directly in line with the machine’s exhaust system to capture the energy from the exhaust air to elevate the temperature of the water to 128° before it enters the booster heater
Flush arm keeps load end clean.
The load end also has a readily removable flush arm to rinse food scraps into the
Self-draining pumps help keep water clean.
Pumps are self-draining when the machine is shut down, so there is no residual water left in the pumps. Installation is quick and easy with modular design, minimal wiring connections, and single point vent. Modular design means the FT900 installs quickly, and reliably. Sections fit through 42" doors. The control panel is already in place, premounted to the power wash/power rinse/final rinse section. Wiring connections are minimal, and there is only a single vent connection, saving time and expense. The control box uses a “single plane” circuitry design for easy accessibility during installation and service. The FT900 is ready to run quickly.
Attention CA Residents:
Prop 65 Warning.
We only Ship to eBay Shipping Address
Please make sure and Double check Shipping Address before make payments.
We have in stock available local pick up or
same day
ship.
Please read item description and sales terms and condition before bidding.
l
Buyer with no feedback must contact us before bidding or bid may be canceled without notice.
By bidding, you are agreeing to all the terms and conditions of this auction.
Please click photos for item details.
What you see in the pictures is what you get.
Only the accessories or parts described in this listing are included with this item.
No other accessories, including other items or accessories that may be pictured,
are guaranteed to be included.
Payment :
All payment must be made within 2 days after auction ends.
Payment method:
Paypal.
Available local pick up no handling cost. we load to yu truck.
Shipping
Item Location: Fullerton, Ca.92831
Winning bidder pays actual freight shipping cost + 0.00 pallet packing cost,
Local pick ups are always  welcome after full payment is made.
Local pick ups always No Handling cost.
Return
We offer a 30-day money back guarantee only on the items which are not same as item descriptions, with the following conditions: *Buyer is responsible for all repacking, shipping and insurance charges for returns. *Items must be returned in original condition. *Large or heavy items that were banded to a pallet and shrink-wrapped must be returned in the same manner. *Refund shall be made on the item purchase price ONLY and does not include any shipping and handling charges
Contact : Charlie
Pictures sell!
Auctiva offers Free Image Hosting and Editing.
300+
Listing Templates!
Auctiva gets you noticed!
The complete eBay Selling Solution.
Track Page Views With
Auctiva's Counter